Renting a Dumpster for a Roofing Tear-Off in South Carolina

Roofing tear-offs are one of the most common dumpster rentals we do, and they're one of the most misunderstood. The instinct is to size by volume — how many squares am I tearing off? — but for roofing jobs, weight is almost always the real constraint.

A 10-yard roll-off holds roughly 3–4 tons of roofing material and is the most common container for a standard residential tear-off. Here's how to think about it.

A square of standard 3-tab asphalt shingles covers 100 square feet and weighs about 230–250 lbs. Architectural shingles run 350–400 lbs per square. A typical 2,000 sq ft home has roughly 20–25 squares of roof surface, depending on pitch.

Run those numbers: 25 squares of architectural shingles = around 9,000–10,000 lbs, or 4.5–5 tons. That's well above the 2-ton included weight in our 10-yard base rate. Overages at $85/ton are predictable and budgetable — just know they're coming.

If there are two or three layers of old shingles (common on older homes), the weight roughly doubles or triples per square. Two layers of 3-tab on a 25-square roof can push 7–8 tons easily. Factor that in before you book.

The 10-yard container has low side walls — about 3.5 feet — which lets crews pitch shingles directly from the roof edge or off a slide without a throw. That matters on a hot SC roof where every step counts.

A larger 20 or 30-yard has more volume but taller walls, which adds handling time and creates more opportunity for overloading. For a single-layer residential tear-off, a 10-yard loaded to proper weight is the efficient choice. For large commercial roofs or multi-layer residential, a scheduled swap (we pick up one full container and drop another) is often cleaner than going to a 40-yard.

The best thing you can do for your roofing haul is keep it a dedicated roofing load. Don't mix shingles with general construction debris, lumber, or household junk. Mixed loads are harder to weigh accurately, and mixing light bulky material with dense shingles creates an unpredictable weight-to-volume ratio.

Old flashing, underlayment, and roofing nails are all fine to include with the shingle load. Ridge vents and metal drip edge can go in too.

Most roofing crews prefer the container on-site the morning the tear-off starts. We can typically deliver same-day or next-day depending on route capacity. We run local routes across the county, so turnaround times stay fast.

If the job runs longer than the rental window, call us — extending by a day or two is simple and billed transparently at the extra-day rate. Don't overfill the container above the top rail waiting for a pickup; loads above the rail are illegal to haul in South Carolina.